5G POE Ethernet Lan Transformer 48 Pins Signal Transmission For LED Driver G4850CG

5G POE Ethernet Lan Transformer For LED driver G4850CG with 48 Pins

Transformers:

Network transformers mainly have signal transmission, impedance matching, waveform repair, signal clutter suppression and high voltage isolation.
The role of the network transformer in the Ethernet is in the Ethernet device. When the RJ45 is connected through the PHY, a network transformer is added in the middle. Some transformer center taps are connected to the ground. When connected to the power supply, the power supply value can be different, 3.3V, 2.5V, 1.8V.
Some of the center taps are connected to the power supply and some are grounded. This is mainly determined by the type of UTP port driver used by the PHY chip. There are two types of drives, voltage drive and current drive. The current drive is connected to the power supply; if the voltage is driven, the capacitor can be directly connected to the ground. Therefore, for different chips, the center tap connection is closely related to the PHY. For details, please refer to the chip's datasheet and reference design. Different voltages are required when connecting the power supply, which is also determined by the UTP port level specified in the PHY chip data used.

Picture:

small electric transformer

smd power transformer

5G POE Ethernet Lan Transformer 48 Pins Signal Transmission For LED Driver G4850CG Images